|
|
|
| PRO-ACCUMASTER VII
|
|
|
|
The Pro-Accumaster VII is a scientific geophysical locator for the detection
of treasures, gold, metals, minerals, cavities, voids, subsurface water etc.
Scans targets by measuring the total electrical resistance of the ground between
the 4 ground rods, which are injected into the soil on a square or rectangular
pattern, and presents the results on a target meter as OHM electrical resistivity
values.
Underground electrical resistance changes with factors like water,
metals or caves. In our latest version with the digital scales display caves,
inert ground, water, minerals, iron, gold - and precious metals.
For the
detection of a metal target it needs to have a mass of 2kg or more. Small
coins or equal sized targets are not detected.
That feature is specially useful when search for treasures,
as there is no interference from the small and near the surface trash
metal objects. It is a truly scientific tool used by archaeologists,
mining industries,
geologists and treasure hunters.
The most efficient geophysical locator
requires not any training nor any experience.
Comes with a 12 Volt 7,2Ah battery and charger inside the case,
and can be used by one operator.
|
The
Pro-Accumaster VII "Carrier wave" signal is transmitted underground from 2 rods at a time, in total 6 directions
on a square or rectangular form, like on the examples 1,2,3 & 4 shown below.
|

Pro-ACCUMASTER vii OHM TARGET METER
Hold a “test switch” for 2 seconds, to determine target location within a
24000 Sq. ft. area!
|
| SPECIFICATIONS
• DETECTION OF TREASURES UP TO 24000 SQUARE FEET AREA
• READS DEPTH FOR VOIDS & METALS
UP TO 33 METERS
• ACCURATE & SCIENTIFIC GEOPHYSICAL LOCATOR
• OHM METER WITH LABELED TARGET ID FOR METALS & VOIDS
• BRIGHT LIGHT LAMP INDICATES GOLD & PRECIOUS
METALS
• EASY TO USE SMALL AND PORTABLE
• COMES IN WATERTIGHT HEAVY DUTY DOSKOCIL CASE
• PROFESSIONAL EQUIPMENT FOR PROFESSIONAL RESULTS
|
| FEATURES
• IGNORES SMALL AND NEAR THE SURFACE OBJECTS
• 4 GROUND RODS AND 4 x 33 m. CABLE SPOOLS
• 2 TEST TARGET DUMMY LOADS FOR IRON AND GOLD
• HAS INTERNAL ELECTRONIC INVERTER FOR 100 Watt SIGNAL POWER
• 12v 7.2Ah BATTERY AND 220v BATTERY CHARGER
• MAXIMUM DEPTH 33M ON LARGE VOIDS - TOMBS
• AUTOMATIC SCIENTIFIC TARGET ID - NO DOWSING
• 2 YEAR GUARANTEE & INSTRUCTIOΝS MANUAL
|
Find
the treasures / gold location using the meter readings. When the 4 rods
are laid just like on the examples below,
gold and silver targets will indicate low OHM values at the Pro - Accumaster
VII meter, with the meter needle pointing to the “yellow” precious metals
area. In order to find the treasure depth, follow the method shown at example
4.
|

Example
1.:
A low (360 ohm) indication represent a copper target
| 
Example 2.:
300 ohm represent gold target
|
|
|
|

Example
3.:
Find the lowest reading and move towards it until the treasure is
located
| 
Example 4.:
When target has been located, get target depth using this pattern
|
|
|