HUNTER
PRO
MPX
DIGITAL
VIKING
5
VIKING
6
VIKING
VK 40
C.SCOPE
440 XD
C.SCOPE
770 XD
C.SCOPE
990 XD
C.SCOPE
1220 XD
C.SCOPE
CS 4MXi
C.SCOPE
CS 6MXi
C.SCOPE
R1
C.SCOPE
9000 HPX II
XP
GOLD MAXX POWER
XP
DEUS
SUPER
PROBE
PULSE
STAR II PRO
LORENZ
DEEPMAX X5
LORENZ
DEEPMAX X6
GEO
EXAMINER
PRO-ACCUMASTER
digital
PRO-ACCUMASTER
VII
RAYFINDER
SPECTRA
ELIMINATOR
Ε-120
"L" RODS
PENDULUM
ANDERSON
UDR
ANDERSON
UAR
ANDERSON
PMR
ANDERSON
PMR II
ANDERSON
PMR III
Home -> Pulse
induction -> Lorenz deepmax x5 & x6
| ||||
LORENZ DEEPMAX X5 & X6
| ||||
 |  | |||
| Both the Deepmax X5 & X6 pulse induction metal detectors have the same performance. Deepmax X6 has an internal GPS data logger, the user can transfer the data to a laptop and see target images after the search is complete. For the Deepmax X5, Gold Detectors offer the ICON DATA imager - an external real time 2D & 3D target imaging device. | ||||
| Lorenz
Deepmax X5 & Lorenz Deepmax X6 series main unit • Backlight display with target classification icons for ferrous/non ferrous metals & conductivity readings 0–99 dependable upon metal type and size. • Bar graph to estimate depth and target center. • DELAY– rejection of small trash in levels, • ZERO– reset key to the ground conditions, • AUTO– automatic tuning to changes of ground conditions (motion mode), • SENS– adjustable sensitivity (detection depth) in levels, • Ability to scan with or without data image capture, • Backlight, Volume, Filters for electromagnetic interference etc. • Grips for hanging it to the supplied holster • GND modes– For fine elimination of minerals or specific metal objects with no loss of depth • Frequency of operation variable for canceling out electromagnetic interference from power lines • Tuning audio • In built aluminum cooler of the electronic circuit • Coil connector to input round coils or large frame coils • Power supply connector from external 12V battery • X5 Connects to the external "ICON DATA" real time target imager, without the need to transfer data to laptop • X6 has internal data logger with USB stick for firmware-updates and data file transport to laptop for graphic target imaging | ||||
| Features
• New GBS pulse induction technology: Top performance metal detector with metal classification on LCD screen • Power supply from external 12 volt 7,2 Ah battery • High sensitivity, depth greater than 10 m. when detects big objects with the 3 x 3m frame search coil. Cancels out interference from ground minerals and radio waves • 3 ground rejection modes (GROUND 1, 2, 3), tune out ground minerals for stable operation to all countries globally • 2 target identification facilities on screen new for a pulse induction metal detector: - 1. numbers 00 - 99 according to metal type (conductivity) & size (small, medium, big). ( operates on all heads ) - 2. FEROUS / NON FEROUS icons generated from the magnetic or non - magnetic target composition (iron or precious metal). ( operates only on DOUBLE D heads ) | |||
| •
Data files can be transferred to a laptop for visualization of
targets • Standard equipment comes with 2 heads (the displayed 35 cm DD round coil and 1m X 1m frame coil) • Other heads available: 26 cm round, 45 cm round, 1,5Χ1,5m (cable coil) 2Χ2m (cable), 3Χ3m (cable). The frame and cable heads reject automatically small shallow trash • Cylindrical probe 4cm diameter x 25 length, to be used in wells, cracks, narrow spaces | ||||
 |  | |||
The
35cm "DOUBLE D" coil
Recognized by it's 2 coil cables- a world novelty, for pulse induction detectors. Separate transmitters and receivers inside, send continuous target information, improving the reliability of target identification on screen. Until now pulse induction detectors had a limited time of pulse transmitting and receiving, and poor receiving signal, because their "single" coils had to switch between transmitting to receiving phases with time delay on every phase. | The
1m X 1m frame coil
Comparable to the small round coils the frame coil increases detection depth, small metals/single coins are not detected. Useful when a bigger, hidden in greater depth target is needed to be found. Cable coils of 8m and 12m perimeter are available for "do-it-yourself" construction on a pvc tube frame, of deeper 2m x 2m and 3m x 3m frame coils. The target detected by a frame coil can be pinpointed in accuracy with a round coil, during excavation etc. Pulse induction metal detectors can accept any size of coil, unlike the VLF metal detectors which are limited to the small size heads. | |||
 | ||||
|
Gold Detectors
international
193 Athinon avenue, 12461 Athens Greece. Tel.: +30 210 4905398 Fax.: +30 210 4256653 Cell.: +30 6977857861 Web. golddetectors.gr E-mail. detect@otenet.gr |