|
|
Home -> Dowsing -> "L" rods
|
|
|
|
|
|
| L
RODS
| |
|
| The "L" Dowsing rods come with a handy power module that clips on the user's belt, and
is powered by a 9 volt battery.
The power module
connects to the dowsing rods with a "Y" cable. With the power module, you do not need special dowsing skills to operate
the rods and locate successfully.
|
The electrical current from power module that
flows inside the dowsing rods amplifies the signals
that
would otherwise be missed by the user. The rods
are gold plated, not to be oxidized and loose
their sensitivity, they are extremely sensitive
and friction
free. Each rod has a balance weight on it's tip,
for stable operation.
When used on the field,
they lock at the target direction. Several readings
can be taken to center the target, for depth
determination.
The rods operate either standalone even from
amateur dowsers, or can be coupled with long
range locators,
dowsing instruments, frequency generators, molecular
frequency gold
detectors. They are an excellent upgrade for
old dowsing locators with poor quality
or worn out antennas.
|
Receiving
Antenna Rods – The Dowsing Rods are powered by the Power Module,
they are 45 cm long and plated with a special gold layer that is
not suffering oxidation from the human skin PH. The purpose of
the Rods is to indicate to the operator that he or she has faced
the
energy line between the user and the target. The dowsing antennas
are normally held steady and balanced at waist level, and slightly
in front of the operator.
They are held pointed in a forward direction
parallel to each other, and at a distance of 8 to 18 inches apart.
What each individual needs to discover is just what distance best
relates to themselves. This decision will be by trial and error.
Please remember that an individual who is relaxed and calm will
operate the dowsing antennas more successfully than one who is
tense and
rigid. The rods will cross naturally by themselves when you enter
the target energy line. When it first happens for you, you will
learned to anticipate success and will welcome it when it happens!
Power Module --
This unit's purpose is to power the Antenna Rods. This way the
system is not self-potential. By increasing user bio-energy,
the power module permits everyone to be a successful user, even
those
that do not have dowsing ability. The unit contains a 9VDC
battery for a power supply. The battery condition is displayed
when you
short circuit the rods together, if no sound is heard it’s
time to change the battery.
To replace the 9 volt battery, simply
open the module by rotating the bottom cap off. The power module
is
turned on when the receiving Antenna Rods are plugged in the
Power Module's receptacle. When not in use, unplug the dowsing
rods from
the Power Module! Storing the Power Module with the Rods plugged
in will drain the 9 volt battery. Do not allow the Rods to
touch
each other while attached to the module as this will short out
the battery also!
|
|
|
| |